TK419-3 GPS tracker is the newest 4g lte gps tracking device of EELINK and the result of building on live GPS tracking and connectivity. With a simple design, it has configurable inputs and outputs - users get a device that best fits their needs.
TK419-3 GPS Tracker is a tracking device which can be used worldwide, it supports 4G LTE full network and fallback to 2G network,TK419-3 can monitor your vehicle by GPS satellite positioning system,Data Uploaded by GPRS/LTE FDD network, a real-time remote location and control of vehicles can be achieved through a powerful service platform. It plays a significant role in logistics and fleet management, helping customers to achieve transparent management, reduce costs, ensure safety, and improve efficiency.
Installation TIPS
You are ready to install your new GPS tracking device. While your specific device will come with installation instructions.
Choose a right location is important.
The best place for a GPS tracker is on the dashboard, at the base of the windshield.
You can also place the device under or inside the dash to hide it from view.
The GPS signal can’t penetrate metal,so don’t stick it under the hood or chassis.
Secure the GPS device using a zip-tie or other fastener, if needed.
What does 4g lte gps tracker stand for? 4g lte gps tracker is short for “fourth generation long-term evolution.” So it’s actually two terms combined. First, 4G represents the fourth generation of mobile technology, the next big advancement after 3G. And long-term evolution, or LTE is industry jargon used to describe the particular type of 4G that delivers the fastest mobile internet experience.
1.Support 4G LTE CAT1 FDD&TDD, fallback to 2G GSM network | |||||
2.Support GPS/ Beidou/ Glonass, GNSS/ LBS for aiding. | |||||
3. Real time tracking,data uploaded by GPRS regularly, check by Web/APP/SMS | |||||
4. Super Wide Input Voltage:9-72V DC | |||||
5.ACC status detection | |||||
6. Support SOS panic alarm(default), optional external battery/temperature&humidity detection/iButton for driver ID identify / BLE / connect to OBD interface | |||||
7.Support Serial port or GPIO port(customize), UART port(customize) | |||||
8.Built-in battery, support power disconnect alarm & low battery alarm. | |||||
9.Built-in motion sensor, support shock alarm include vibration, collision and falling alarm | |||||
10.GEO-fence alarm (In or out of setting area) | |||||
11.Speed alarm (auto cut engine when over speed and recover when normal speed). | |||||
12.Cut off engine by relay remotely | |||||
13.Displacement alarm | |||||
14.EELINK protocol 2.0, Firmware OTA | |||||
15. USB connect with PC to configure device | |||||
16.Waterproof level IP65 | |||||
17. Device is with FCC /CE approval |
Voltage: | 9-72 VDC | ||||
Device wire length | 75mm | ||||
Standby Current |
Poweroff(15uA); Sleep(1.1mA); Idel(12.5mA) |
||||
Satellite Accuracy | 5-15m | ||||
LBS Accuracy | >100m | ||||
GNSSBand | 1575MHz | ||||
GSM Band | GSM850/EGSM900/DCS1800/PCS1900 | ||||
LTE Band |
FDD(B1/B2/B3/B4/B5/B7/B8/B12/B13/B17/B18/B19/B20/B25/B26/B28/B66) TDD(B34/B38/B39/B40/41) |
||||
Working temperature & humidity |
-20℃~75℃; 20%~90% RH |
||||
Hot/warm/cold Start | <3s, <26 s, <35 s | ||||
Battery Capacity | 160mAh | ||||
Dimensions (mm) | 89(L)X 37(W) X 12(H) | ||||
Net Weight | 49g |
Optional accessories:
Relay
SOS button
external battery
temperature/humidity probe
iButton
OBD cable
Please inquiry to us if need the optional accessories.