A brief analysis of the correct use of car gps tracker

With the development of science and technology, the application of locators is more and more extensive, for a car locator, it is necessary to master its correct use, car gps tracker you really want to use?

GPS positioning terminal is divided into: wiring money and free installation money;

In addition, the two car locator installation method is also slightly different, the wiring model of the locator needs to connect the vehicle's power supply, in order to normal 24 hours of operation; The free installation type positioner, usually after a good charge, it will determine the standby time according to the battery capacity and working mechanism of the positioner;

Starting method of GPS positioning terminal:

1. Install the SIM card to the car locator;

2. Charge/power on the positioner so that it can be powered on;

3. After the vehicle or locator is taken away from the outside for a period of time, the locator can be activated and used;

The steps for installing a SIM card in a car locator are as follows:

1. Open the rear cover of the locator or the SIM card slot plug.

2. Insert the SIM card correctly according to the card layout on the locator.

3. Close the rear cover or slot plug;

Vehicle locator power operation mode:

1. Wiring model locator: If you understand the car circuit, you can install yourself, first of all to determine the electrical pressure supported by the equipment and the car battery output voltage in the same range, and then find the positive and negative power supply, the negative is very easy to find, the body of the iron place is the negative electrode, the positive electrode in the safety box, the car key switch near to find or directly connected to the battery; If you do not understand, you can also ask the relevant technical personnel to install.

Tip: Good electrical performance, is not affected by the car key switch, directly from the car battery power line; The light side of the car locator should face skyward, not cling to metal objects to block the internal GPS antenna, which can also pick up satellite signals from 20,000 kilometers away.

2. Free installation type positioner: Connect the wire of the positioner with the positioner and insert it into the power supply. When the positioner is fully charged, the charging indicator light of the positioner will change color or stop blinking;

Note: Different models of car locator charging indicator is displayed in different ways, so it can be operated according to different models of locator. After the preceding steps are complete, the locator can be used normally.

The above is about the proper use of the car gps tracker, it is very important to master these, to avoid unnecessary problems when using the car locator.

What is the principle of 4g wireless tracker, and what can lead to inaccurate positioning?

What does it cost to buy a 4g car gps tracker?

How to judge the impact of 4g vehicle gps tracker on battery life?

What can the 4g lte sos tracker find?

How to use the car gps tracker after installation?