Precautions for installing GPS positioning equipment

Modern vehicle management must be inseparable from positioning equipment. The GPS equipment of Eelink Communication Technology Limited is very powerful, not only can locate the position of the vehicle in real time, but also detect the stopping state of the vehicle. You can also view the historical driving trajectory of the vehicle through the GPS positioning device. High-end GPS devices also have functions such as oil volume reading, battery voltage reading, and data reading of intake air temperature and air flow. The main ways of connecting GPS devices and vehicles now include wiring type, wireless type, and interface type.

Wiring type equipment is usually connected to the positive pole of the battery, and the negative pole to the negative pole of the vehicle battery or ground or any point. Put the wireless device directly in the car and stick it to a place where the signal is not blocked. The OBD interface type only needs to plug the device into the OBD interface of the vehicle.

The uploading of data by positioning devices relies on the network, and most of them currently use SIM cards. Before installation, check whether the power supply voltage of the device matches the power supply system of the vehicle, and then put the data card into the card slot of the device. Remember not to do it while the device is powered on, otherwise the card or device will be burned out.

Solved the problem of equipment installation, let's talk about the problem of equipment environment. The positioning device first reads the position through the satellite positioning system and then uploads the data from the network. If the position information is to be accurate, it must be ensured that the signal is received well. Our positioning equipment must be installed in a place where there is no signal interference, away from electronic equipment such as audio and video and intercom in the car. In addition, pay attention to waterproof, shockproof and high temperature. Choose a location where water is not easy to enter and keep the device dry. Do not place the device on the air outlet of the air conditioner to avoid the accumulation of condensate in the device when the temperature difference changes. Mounting in the air in a location with high vibration will affect the signal reception. If the temperature exceeds the normal operating temperature range, it will cause damage to the equipment. These are issues that we need to pay attention to when installing the equipment.

After the device is installed, the vehicle can be bound to the platform. After successful binding, the mileage data on the vehicle odometer can be synchronized to the GPS device. The information data generated after the vehicle is bound to the GPS device will be stored in the enterprise car management system, which can be viewed through a mobile phone or viewed on a computer or directly exported and printed. It can also generate an exclusive account for each vehicle.

Tag: GPS positioning device,install GPS positioning device,GPS device function